AH6LE REMOTE BASE SYSTEM - WILSONVILLE

 

 

SUPERVISORY FUNCTIONS

85 Touchtone® Pad Test - all digits after the "85" for that transmission will be read back, except for D)

4321 DVR Test (allows you to record a few seconds to check how you sound "into" the repeater)

A80 Announce Time of Day

A81 Announce Date

AA1 Announce OutsideTemperature

AA2 Announce 440 PA Temperature

AA3 Announce 2 Meter PA Temperature

AA4 Announce Link PA Temperature

AA5 Announce Building Temperature

AA6 Announce Rack Temperature

D Command FORCE

LOCAL LINKING

When using the 2 meter repeater:

C71 Monitor the 440 repeater only (don't actually transmit on the other repeater)

C72 Two-way link to the 440 repeater

C73 Completely unlink completely from the 440 repeater

C74 Link to Hub Repeater in receive only mode

C75 Link to Hub Repeater in transceive mode

C76 Completely unlink from Hub Repeater

REMOTE LINKING

#A77 Link Beavercreek 2 meter remote base to Wilsonville in receive only mode

#A78 Link Beavercreek 2 meter remote base to Wilsonville in transceive mode

#A79 Unlink Beavercreek 2 meter remote base from Wilsonville

#A74 Link Beavercreek 440 repeater to Hub repeater in receive only mode

#A75 Link Beavercreek 440 repeater to Hub repeater in transceive mode

#A76 Unlink Beavercreek 440 repeater from Hub repeater

#XXXX Connect to IRLP Node XXXX

#73 Disconnect from IRLP Node



NOTES ON USING THE IRLP SYSTEM


Whatever repeater you're currently using, it must be linked to the Hub repeater in order to access IRLP

Announce your intentions BEFORE actually connecting. For example "This is AH6LE functioning IRLP" is sufficient.

A complete list of IRLP Nodes may be found at http://www.irlp.net/